|
Home
Intimidator Help
Files
Build a Sniper
Clone
Nel-Spot 707 Restoration
| |
Just started this - will link all files shortly....if you need something right away, use address at bottom of page and I will try to get to you immediately.
Info directly from Countermeasure, the guy that designed and wrote the software, firmware and did hardware layout/design. The Manuals were done by Roger Rabbit. They gave them to me to make available for download to folks who need them.
Entropy Firmware:
4 firmware files are included. All are version 2.2.
"Stock" is what comes stock on the board.
"PSP 15bps Ramping" is, well, what is says. I don't remember exactly how it works, but I think it waits for 3 shots, then ramps up to 15bps in reactive mode.
"Capped 15bps Semi-Only" is also what is says.
"Experimental" is just like the "Stock" firmware, but had more aggressive timings and reworked debounce settings to allow for more fine-tuning.
Alias Firmware:
3 firmware files are included.
"V3.0" is the older stock firmware without the "Off The Break" modes, and older trigger programming method.
"V3.1" is the "stock" firmware coming on the boards. The manual is based on this firmware.
Fun Alias Goodie:
"Storm Team Firmware" is a special firmware Goldie had me put together for Storm when he sponsored them back in 2005.
It based on Alias 3.0 firmware. It is a secret "Off The Break" mode that requires 2 stages to activate.
If you turn the gun on, and hold Membrane Button2 in for 5 seconds, it will blink once quickly.
Once this is done, if you hold the trigger in for 5 seconds, the mode is on. It will run in high ramping until
the trigger is not pulled for a second or two. Once that happens, the mode is deactivated.
Once the mode has been used and is deactivated, it can't be activated again until the board is power-cycled.
Chaos 2k4 Firmware:
3 firmware files are included. All are version 2.2.
"Stock" is what comes stock on the board.
"PSP 15bps Ramping" is, well, what is says. I don't remember exactly how it works, but I think it waits for 3 shots, then ramps up to 15bps in reactive mode.
"Capped 15bps Semi-Only" is also what is says.
Pandora (AKA) Firmware:
3 firmware files are included. All are version 2.2.
"Stock" is what comes stock on the board.
"PSP 15bps Ramping" is, well, what is says. I don't remember exactly how it works, but I think it waits for 3 shots, then ramps up to 15bps in reactive mode.
"Capped 15bps Semi-Only" is also what is says.
Vlink:
3 versions are included.
Use Vlink 2.2 with older Entropy, Chaos, and Pandora firmware (has an installer).
Use Vlink 3.0 with Alias 3.0 firmware (has an installer).
Use Vlink 3.2 with Alias 3.1 firmware (no installer; just copy the files to a folder).
Manuals:
AKA Pandora Install
Pandora Manual
Chaos Enthropy Board
Chaos 2K4 Board
Chaos Alias V3.1
|
